YOUR BASKET
0 items

 
Brands
 
Thetford Spares
 

Replacement Cassette Toilet\nPump

Replacement Cassette Toilet\nPump
Click to enlarge
Price: £17.50
Availability: Out of Stock
Model: ZZ16374
Average Rating: Not Rated

Quantity Discount:
Order Quantity Price Per Item
10 £13.00
20 £12.50
30 £12.00

Share |

Please note this is a non-genuine item

Replacement Cassette Toilet Flush Pump

Suitable for the following Thetford Cassette toilets: C2, C200CWE, C402C, C402X, C502C, C502X

Items included in the kit: 1x Flush pump with 1mtr of cable, 2x Red butt crimp connectors, 1x Heatshrink for sealing the cable joint.

Please see check out the information below for the different models.

Thetford Casette Toilet C2 Model

The C2 Is a bench type toilet & has its own built in flush water tank which you fill from the outside via a funnel in the access door

NOTE: In the early nineties Thetford changed there pump supplier & in doing so created two problems!

So there are two problems you may encounter with some Early C2 Models: Whether you buy a geniune pump or not you may encounter these problems.

Problem 1: Some early toilets had a large diameter pump, without buying a geniune pump & getting a new bracket the only way to over come this is to pack out the new pump with a suitable material.

Problem 2: The diameter of the outlet on the early pumps was small then the new ones, there is two ways of resolving this: either purchase a replacement flush tube Thetford part number: 1637862 or enlarge the existing flush tube so the new pump will fit. Buying a genuine pump will not resolve this problem.

The pump is located under the toilet roll holder well.

Fitting Instructions: Safety first! Step 1: Disconnect leisure battery, mains electric & other power source, Step 2: Remove toilet roll holder well if need it can be prised up with a soft instrutment, Step 3: disconnect flush tube from the old pump, Step 4: Remove the screw in the pump retaining bracket, Step 5: remove pump from tank, Step 6: Cut power cable as close to the old pump as possible, Step 7: remove retaining bracket from old pump & keep to one side, Step 8: Fit the black heatshrink & the pump retaining bracket to the power supply cable on the toilet side , Step 9: Strip back the outer insulation on the power cable on toilet side, Step 10: Strip Back the insulation on the inner cores of power supply cable, Step 11: Cut the cable on the new pump to the appropriate length, Step 12: Strip back the outer insulation on the power cable on the new pump, Step 13: Strip Back the insulation on the inner cores of power cable of the new pump, Step 14: Connect the wires together using the crimp connectors supplied, Step 15: Heat up the heatshrink so it seals the cable joint, Step 16: fit the pump into the flush tank & secure with the screw removed early, Step 17: Refit Flush tube, Step 18: Reconnect power sources, Step 19: Fill flush tank & test, Step 20: Enjoy your flushing toilet.

Thetford Cassette Toilet C200CWE Model

The C200 CWE Is a toilet which has a swivel bowl, it has its own built in flush water tank which you fill from the outside via a small access door, the flush pump is opertaed via a big blue button on top of the toilet.

Thetford is located under the control panel (big blue button) on the top of the toilet, this panel can be removed by prising it off carefully with a soft instrument. 

Thetford Cassette Toilet C400 Series Toilets

The C403C is a bench type toilet, it has its own built in flush water tank which you fill from the outside via a funnel in the access door. This toilet has a level gauge for the waste holding tank on the control.

The pump is located under the control panel/flush knob which can be removed by prising it off carefully with a soft instrument. 

The C403X is a bench type toilet, it has its own built in flush water tank which you fill from the outside via a funnel in the access door, the only diffence between this model and the C403C is this model as well has having a multi gauge for the waste holding tank it also have a multi level gauge for the flush water tank.

The pump is located under the control panel/flush knob which can be removed by prising it off carefully with a soft instrument. 

Thetford Cassette Toilet C500 Series Toilets

The C502C is a bench type toilet, it has its own built in flush water tank which you fill from the outside

The C502X is a bench type toilet, it has its own built in flush water tank which you fill from the outside

 

Tools required for this job:

Heatgun/Hair Dryer, Cable Cutters, Cable insulation Strippers,  Insulated Cable Connector Crimp Pliers, No2 Pozi Screwdriver.

This item can be collected from our premises

Please purchase on ebay first & allow one hour before collection, if purchasing out off opening times please allow one hour after opening time before collecting.

Dalesview Caravans The Workshop, Newby, Clapham, LA2 8HS Opening Times: Mon-Fri 0800-1800 Sat 0900-1700

Payment Methods accpeted:

Paypal (Please note if paying by Paypal E-cheque, goods will only be released once cleared payment has been received). 

Credit/Debit in person or over the telephone, (Please do not send card details by any other method)

Bank transfer our account details are: Account Name: Dalesview Caravans Sort Code 09-01-28 Account Number: 45518444, Please send us a message to let us know once payment has been made.

Cheque by post made out to Dalesview Caravans (Please note we will only release goods once the cheque has cleared),

Postal Order by post made out to Dalesview Caravans

Cash In person only

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Replacement Cassette Toilet\nPump
Click to enlarge